Admix Equipment | Liquid Ring Pump Specifications

Admix Equipment | Liquid Ring Pump Specifications

Liquid Ring Pump Specifications

Overview | How it Works | Options | Datasheet

 

The LRP-425 Specifications are as follows:

Motor Types NEMA 213, IEC 112, or IEC 132 available in Stainless Steel, High Efficiency TEFC or TEXP, White Washdown Duty
Motor Size (HP) 7.5 hp / 5.5 kw
Input Voltage 3/60/230-460
Full Load Amps 230v: 19 amps / 460v: 9.4 amps
RPM 1750
Recommended Max Viscosity 1500 cps
Max Flow Rates  90 gallons / 340 liters per minute
Lift  Up to 19 feet / 5.8 meters (based on water)
Seal Types  Single or double mechanical seal, cartridge design
Impeller Setting  Motor stub shaft sets the impeller gap
Inlet / Outlet Size  2 in. / 51 mm
Contact Surfaces  316L with 32 Ra finish standard, Optional: 316L 10 Ra or 20 Ra, Electropolish
Drain (Optional)  3/4 in. / 19mm Tri Clamp