Safematic (Safe Unit) Installation and Operation Video

James Crowell - Wednesday, November 20, 2019


Written by James Crowell, Field Service Engineer

If you have a Boston Shearmill, DynaShear, Fastfeed, PIC, Optifeed, Shearpump, MayoMill or Flowshear with double mechanical seals, we have a video that provides step by step instructions for the installation, adjustment, and operation of the John Crane Safematic (Safeunit) for these inline mixers. The Safematic device controls the flow and pressure of the barrier fluid to the seal. The video (at 50 seconds in) will show you the connection, proper adjustment, and operation of the Safematic (Safeunit). 

It is critical that all double mechanical seals be properly lubricated for your application. Installing and properly operating the safeunit is critical to the life of the seal. If the safe unit is not installed properly and the seal is not lubricated it will lead to seal failure. Seals running without lubrication will fail very quickly. We're here to help so if you have any questions or comments please contact the Aftermarket Group online or call us toll-free at 1-800-466-2369 or 1-603-627-2340.

If YouTube is restricted at your workplace, we can send you a link to download the video or send it to you on a USB drive. Please request through James Crowell at jcrowell@admix.com or via phone at 1-800-466-2369.

Go Back