Rotostat Specifications

Rotostat XP Model (for high solids & viscosity)


Selections shown below are based on 100 cycles per second (CPS) viscosity. This chart reflects the range of mixing equipment available and indicates some common horsepower and motor speed configurations.

Please use for reference only and not as criteria for ordering a unit.

Model Maximum Batch Size (gallons) Standard HP Flow Rate (GPM) Mixing Head Dia. (inches) Maximum Shaft Length (inches) Approx. Weight (lbs)
85XP63(80XP63) 60 1.5 410 5.1 32 75
85XP63(80XP63) 110 3 860 5.1 36 92
105XP81(100XP63) 250 5 1160 6.5 56 145
112XP94 400 7.5 1720 7.7 64 215
132XP124 600 7.5 2300 10.2 67 258
160XP148 1000 10 3490 12.6 92 350
180XP175 1500 20 5090 14.3 84 560
200XP200 2500 15 6010 16.5 102 710
225XP225 3500 25 7910 18.6 94 950
250XP250 5000 30 11690 20.7 114 1210
280XP300 7500 50 19140 24.8 135 1950


Rotostat X Model (for low to moderate viscosity emulsions)


Selections shown below are based on 100 cycles per second (CPS) viscosity.This chart reflects the range of mixing equipment available and indicates some common horsepower and motor speed configurations.

Please use for reference only and not as criteria for ordering a unit.


Model Maximum Batch Size (gallons) Standard HP Flow Rate (GPM) Mixing Head Dia. (inches) Maximum Shaft Length (inches) Approx. Weight (lbs)
85X63(80X63) 30 1 230 5.1 48 60
90X61 75 3 500 6.5 46 95
105X94(100X94) 150 5 770 7.7 52 130
112X124 225 5 890 10.2 54 160
132X148 450 7.5 1520 12.6 62 245
160X175 750 15 2400 14.3 68 490
180X200 1000 10 2490 16.5 91 530
200X225 1500 15 3550 18.6 93 645
250X250 2500 25 4860 20.7 115 980
280X300 4000 30 6300 24.8 128 1250
355X350 7000 50 10010 29 140 1930
400X400 10000 75 14950 33 160 2850