Fastfeed™ Powder Induction and Dispersion System
Mixing has changed. See how.
The Admix Fastfeed powder induction and dispersion system consistently delivers perfect product across any batch size. This integrated, skid-mounted inline powder induction and dispersion system is revolutionizing batching by enabling processors to:
- Cut batch times in half
- Improve operator safety and ergonomics
- Reduce energy consumption up to 70%
- Eliminate dusting and reduce air entrainment
The Fastfeed powder induction and dispersion system inducts, wets, and disperses countless ingredients, instantly eliminating fisheyes. Proteins, gums, starches, vitamins, fiber, sweeteners, stabilizers, emulsifiers, flavors, and colors are dispersed at rates up to 450 pounds per minute in a single pass. In addition, our Fastfeed for meat and poultry processors provides inline simultaneous powder induction (up to 160 lbs/minute) and dispersion for any size batch. The high shear is applied inline and tanks act as slow speed "hold" tank mixers and no longer require in-tank high shear mixers.
Powders are introduced at the same rate every time through the Fastfeed hopper so there are no batch-to-batch inconsistencies. If the finished product receives a thermal treatment in a plate heat exchanger, burn-on from unmixed ingredients is eliminated allowing longer process times and less frequent CIP cycles.
Let our application engineers recommend a customized powder mixing solution for you or have your ingredient tested for free in our pilot lab.
In addition, batch times are often cut in half as powders are inducted and dispersed into the liquid stream while the batch tank is being filled. The Fastfeed disperses all powders directly into the blend tank, so there are no more time-consuming pre-blends or “side batches” that require processors to fill, add powder, mix, transfer, and repeat.
And with a total of 15 horsepower driving the pump and the DynaShear, Fastfeed consumes up to 70% less energy than conventional tank mixers.